martec Mould remover with chlorine
Permanently removes mould, fungi, mould stains and bacteria on joints, walls, ceilings, wood and many plastics.
- no additional cleaning product necessary
- permanent removal of mold, fungi, mould stains as well as bacteria
Do not pre-treat mould growth, in order to avoid spreading mould spores. Spray from a distance of approx. 10 cm and allow to take effect for approx. 20 minutes. If infestation is heavy, repeat use after approx. 10 minutes. Then rinse with plenty of water. Enough to treat approx. 5-10m², depending on infestation and absorbency of the surface.
Do not use with other cleaning products (poison hazard!) Provide good ventilation while the product is taking effect. Protect skin, textiles, plants and metals against splashes. Discolouration may occur on tiles with damaged glazing. Check material compatibility on an unobstrusive location. Keep product frost-free, cool, dark and upright during storage and transport. Use biocides safely. Always read the label and product information before using.
Active ingredient:
Sodium hypochlorite 1,5 g/100 g, 0,24% active chlorine
500 ml
Item no.: 33062
Pharmacode: 4792021